Prof.dr.ing.
Doina RADUCANU
http://www.researcherid.com/rid/F-8974-2010
http://www.scopus.com/authid/detail.url?authorId=6602880475
I. TEZA (E) DE DOCTORAT
(T)
|
T1. |
Cercetări
privind influenţa deformării plastice şi a tratamentelor
termice asupra proprietăţilor electrice, magnetice şi a
gradului de texturare al benzilor de transformator pentru industria
electrotehnică, Universitatea POLITEHNICA Bucuresti, 1990. |
II. CĂRŢI
PUBLICATE (C)
Ca – Cărţi
/ cursuri (manuale) pentru uzul studentilor, publicate în edituri recunoscute.
|
Ca1. |
A.
Nocivin, V.D. Cojocaru, I. Cinca, D.
Raducanu. Nanomateriale si nanotehnologii, Ed. PRINTECH, 2010, ISBN
978-606-521-503-0 (pag. 156); |
|
Ca2. |
D.
Raducanu, A. Nocivin, V.D. Cojocaru,
I. Cinca. Notiuni de biomecanica pentru ingineria materialelor, Ed.
PRINTECH, 2009, ISBN 978-606-521-262-6 (pag. 136); |
|
Ca3. |
D. Raducanu, I. Cinca, A.
Nocivin, V.D. Cojocaru, et al. Materiale
nanostructurate biocompatibile pentru aplicatii medicale, Vol. I, Ed.
PRINTECH, 2008, ISBN 978-606-521-002-8 (pag. 163); |
|
Ca4. |
D. Raducanu, V.D. Cojocaru, I.
Cinca. Elemente de design folosite in
ingineria materialelor, Ed. Cartea Universitara, 2007, ISBN
978-973-731-503-8 (pag. 142); |
|
Ca5. |
D. Raducanu, E. Cazimirovici,
I. Cinca, V.D. Cojocaru, L. Angelescu, I. Negulescu. Principii teoretice, tipuri de teste si aplicatii practice in
mecanica ruperii, Ed. PRINTECH, 1999, ISBN 973-9475-50-7 (pag. 83); |
|
Ca6. |
D.
Raducanu, V.D. Cojocaru, I. Cinca, “Elemente
de design folosite in ingineria materialelor”, Ed. Cartea Universitara,
2007, ISBN 978-973-731-503-8 (pag. 142); |
Cb - Cărţi
de specialitate publicate în edituri recunoscute (autor, coautor, editor).
|
Cb1. |
D. Raducanu, I. Cinca, A.
Nocivin, V.D. Cojocaru, et al. Materiale
nanostructurate biocompatibile pentru aplicatii medicale. Contributii la
dezvoltarea domeniului, Vol. II, Ed. PRINTECH, 2008, ISBN
978-606-521-007-3 (pag. 203); |
|
Cb2. |
D. Raducanu, V.D. Cojocaru, I.
Cinca, A. Nocovin, et al. Retea
integrata de cercetare pentru constituirea unei platforme tehnologice de
biomateriale avansate compatibila EuMaT, Ed. PRINTECH, 2007, ISBN
978-973-718-768-0 (pag. 85); |
|
Cb3. |
A.
Nocivin, V.D. Cojocaru, I. Cinca, D.
Raducanu. Nanomateriale si nanotehnologii, Ed. PRINTECH, 2010, ISBN
978-606-521-503-0 (pag. 156); |
|
Cb4. |
D. Raducanu. Medii solide deformabile. Comportarea
la deformare a materialelor metalice, Ed. Cartea Universitara,
2006, ISBN 978-973-455-0 (pag. 136); |
|
Cb5. |
D.
Bunea, D. Raducanu, A. Nocivin, I. Ciuca, V. Antoniac. Implant Materials, Ed. PRINTECH, 1999,
ISBN 937-9475-85-X; |
|
Cb6. |
D. Basuc, L.
Angelescu, I. Ciuca, N. Ghiban, D. Raducanu. Forming of Metals, Ed. PRINTECH, 1998, ISBN 973-9402-51-8; |
|
Cb7. |
E.
Cazimirovici, I. Negulescu, M. Tarcolea, D. Raducanu. Teoria şi tehnologia
deformării prin tragere, Editura Tehnică –
Bucureşti, 1990, ISBN 973-31-0266-0; |
III. ALTE MATERIALE
PUBLICATE (I,D)
It - Culegeri
şi indrumare publicate în tipografii locale/de instituţii sau de uz
intern.
|
It1. |
D. Raducanu. Prelucrarea plastică a metalelor,
Editura UPB, 1996 (pag. 116); |
|
It2. |
D. Raducanu. Mecanica ruperii-principii teoretice
fundamentale, Editura UPB, 1996 (pag. 61); |
|
It3. |
N. Ghiban, D. Raducanu, L. Angelescu. Metal
Forming-Elements of Theory of Plasticity, Editura UPB, 1996 (pag.
200); |
|
It4. |
L. Angelescu N. Ghiban,
D. Basuc, D. Raducanu, I. Negulescu, B. Ghiban. Metal Forming - Aplications, Editura UPB, 1997 (pag.
200); |
|
It5. |
E. Cazimirovici, I.
Negulescu, D. Raducanu, I. Ciuca, L. Angelescu , I. Cinca. Teoria şi
tehnologia laminării şi tragerii - Lucrări de laborator, Editura UPB, 1997 (pag.
157); |
D - Alte
lucrări publicate: capitole publicate în volume colective, capitole
teoretice redactate, sisteme de laborator funcţionale etc.
|
D1. |
D.
Raducanu, V.D. Cojocaru, I. Cinca. Cap. 29.2 Materiale cu
comportare atipica la solicitari mecanice, TRATAT DE STIINTA SI
INGINERIA MATERIALELOR, Vol. 3, Metale. Aliaje. Materiale speciale. Materiale
compozite, Ed. AGIR, 2009, ISBN 978-973-720-261-1, ISBN 978-973-720-064-0 (pag. 24); |
IV. ARTICOLE / STUDII IN
EXTENSO PUBLICATE (R,V)
Ris - Reviste de
specialitate de circulaţie internaţională recunoscute (cotate /
indexate ISI Thomson Reuters).
|
Ris1. |
V.D.
Cojocaru, D. Raducanu, C. Vasilescu, I. Cinca, P. Drob, E. Vasilescu, S.I.
Drob. Improvement of the corrosion
resistance and structural and mechanical properties of a titanium base alloy
by thermo-mechanical processing, acceptat
la: Materials and Corrosion, ISSN 0947-5117, DOI:10.1002/maco.201206577; [ISI-Web of Science/Science Citation Index
Expanded; Scor relativ de influenta: 1,40476].
Recenzii/Indexari: SCOPUS; |
|
Ris2. |
I. Cinca,
D. Raducanu, A. Nocivin, D.M. Gordin, V.D. Cojocaru. Formation of nano-sized grains
in Ti-10Zr-5Nb-5Ta biomedical alloy processed by accumulative roll bonding
(ARB), acceptat la: KOVOVE MATERIALY, ISSN 0023-432X; [ISI-Web
of Science/Science Citation Index Expanded;
Scor relativ de influenta: 0,67262]. Recenzii/Indexari: SCOPUS; |
|
Ris3. |
V.D.
Cojocaru, D. Raducanu, D.M. Gordin, I. Cinca. Texture evolution during ARB (Accumulative Roll Bonding) processing
of Ti-10Zr-5Nb-5Ta alloy, Journal of Alloys and Compounds, 546 (1) 2013, 260-269, ISSN 0925-8388, DOI:10.1016/j.jallcom.2012.08.103; [ISI-Web
of Science/Science Citation Index Expanded;
Scor relativ de influenta: 2,80357]. Recenzii/Indexari: SCOPUS; |
|
Ris4. |
M. Popa, E. Vasilescu, P. Drob, D. Raducanu, J.M.C.
Moreno, S. Ivanescu, C. Vasilescu, S.L. Drob. Microstructure, mechanical, and anticorrosive properties of a new
Ti-20Nb-10Zr-5Ta alloy based on nontoxic and nonallergenic elements,
Metals and Materials International, 18 (4) 2012, 639-645, ISSN
1598-9623, DOI:
10.1007/s12540-012-4026-7; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000308102800012; Scor relativ de
influenta: 1,60119]. Recenzii/Indexari:
SCOPUS; |
|
Ris5. |
V. Popescu, D. Raducanu, G.L. Popescu. Optical properties
of PbS powders obtained by chemical precipitation, Chalcogenide
Letters, 9 (5) 2012, 175-183, ISSN 1584-8663; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000305266800001; Scor relativ de
influenta: 0,37419]. Recenzii/Indexari:
SCOPUS; |
|
Ris6. |
N.D. Scarisoreanu, A. Andrei, R. Birjega, R. Pascu,
F. Craciun, C. Galassi, D. Raducanu, M. Dinescu. Electrical and optical investigations on Pb1-3x/2LaxZr0.2Ti0.8O3 thin
films obtained by radiofrequency assisted pulsed laser deposition, Thin
Solid Films, 520 (14) 2012, 4568-4571, ISSN 0040-6090, DOI:
10.1016/j.tsf.2011.11.066; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000304567900015; Scor relativ de
influenta: 1,57740]. Recenzii/Indexari:
SCOPUS; |
|
Ris7. |
V.D.
Cojocaru, D. Raducanu, T. Gloriant, I. Cinca. Texture evolution in a Ti-Ta-Nb alloy processed by severe
plastic deformation, JOM-US, 64 (5) 2012, 572-581,
ISSN 1047-4838, DOI:10.1007/s11837-012-0312-6; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000304447300007; Scor relativ de influenta: 3,34524]. Recenzii/Indexari: SCOPUS; |
|
Ris8. |
V.D. Cojocaru, D. Raducanu, T. Gloriant, E.
Bertrand, I. Cinca. Structural observations of twinning
deformation mechanism in a Ti-Ta-Nb alloy, Conference: 4th
International Conference on Advanced Materials and Structures – AMS 2011, Location:
Timisoara ROMANIA Date: OCT 27-28, 2011; Solid
State Phenomena, 188 (188) 2012, 46-51, DOI:10.4028/www.scientific.net/SSP.188.46, ISSN 1454-4164; Recenzii/Indexari: SCOPUS; |
|
Ris9. |
D. Raducanu, V.D. Cojocaru, I. Cinca, I. Dan. Thermomechanical
processing of a biocompatible Ti-Ta-Nb alloy, Conference: 4th
International Conference on Advanced Materials and Structures – AMS 2011, Location:
Timisoara ROMANIA Date: OCT 27-28, 2011; Solid
State Phenomena, 188 (188) 2012, 59-64, DOI:10.4028/www.scientific.net/SSP.188.59, ISSN 1454-4164; Recenzii/Indexari: SCOPUS; |
|
Ris10. |
V.D.
Cojocaru, T. Gloriant, D.M. Gordin, E. Bertrand, D. Raducanu, I. Cinca, I.
Dan. The evaluation of mechanical
properties for a Ti-Ta-Nb biocompatible alloy, Conference: 7th International Conference on Materials Science and
Engineering – BRAMAT 2011, Location:
Poiana Brasov ROMANIA Date: FEB 24-26, 2011; Journal
of Optoelectronics and Advanced Materials, 13 (7) 2011, 912 - 916, ISSN
1454-4164; [ISI-Web of
Science/Science Citation Index Expanded - WOS:000294887100034; Scor relativ de influenta: 0,33089]. Recenzii/Indexari: SCOPUS; |
|
Ris11. |
V.D. Cojocaru, D.
Raducanu, I. Cinca, I. Dan, S. Ivanescu, E. Jalba. The mechanical properties evaluation
for an as-cast Ti-Ta-Zr alloy, Conference: 7th
International Conference on Materials Science and Engineering – BRAMAT 2011,
Location: Poiana Brasov ROMANIA Date: FEB 24-26, 2011; Metalurgia
International, 16 (4) 2011, 35-38, ISSN 1582-2214; [ISI-Web of Science/Science Citation Index Expanded - WOS:000289186700008; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris12. |
I. Cinca, D. Raducanu, V.D.
Cojocaru, I. Dan, V. Dogaru, E. Jalba. The tantalum content influence upon
mechanical properties for a Ti-Al-Nb-Ta alloy, Conference: 7th International Conference on Materials Science and
Engineering – BRAMAT 2011, Location:
Poiana Brasov ROMANIA Date: FEB 24-26, 2011; Metalurgia International, 16 (4)
2011, 45-48, ISSN 1582-2214; [ISI-Web
of Science/Science Citation Index Expanded - WOS:000289186700010; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris13. |
D. Raducanu, E. Vasilescu, V.D. Cojocaru, I.
Cinca, P. Drob, C. Vasilescu, S.I. Drob. Mechanical and corrosion resistance of a new
nanostructured Ti–Zr–Ta–Nb alloy, Journal of the Mechanical Behavior of
Biomedical Materials, 4 (7) 2011, 1421-1430, ISSN 1751-6161, DOI:10.1016/j.jmbbm.2011.05.012; [ISI-Web of Science/Science
Citation Index Expanded - WOS:000294187500052; Scor relativ de influenta: 1,72529]. Recenzii/Indexari: SCOPUS; |
|
Ris14. |
D. Raducanu, A.
Cimpean, E. Vasilescu, V.D. Cojocaru, I. Cinca, P. Drob, S. Ivanescu. Corrosion behaviour and biocompatibility
of a new dental noble AuPdAgTi alloy, Materials and Corrosion, 9 (61) 2010, 775-782, ISSN 0947-5117, DOI:10.1002/maco.201005636; [ISI-Web of Science/Science
Citation Index Expanded - WOS:000282078400006; Scor relativ de influenta: 1,40476]. Recenzii/Indexari: SCOPUS; |
|
Ris15. |
E. Vasilescu, P. Drob,
D. Raducanu, V.D. Cojocaru, I. Cinca,
D. Iordachescu, R. Ion, M. Popa. In
vitro biocompatibility and corrosion resistance of a new implant titanium
base alloy, Journal of Materials Science - Materials in Medicine, 21 (6)
2010, 1959-1968, ISSN 0597-4530, DOI:10.1007/s10856-010-4057-x; [ISI-Web of Science/Science
Citation Index Expanded - WOS:000278525300021; Scor relativ de influenta: 1,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris16. |
A. Nocivin, D.
Raducanu, I. Cinca, V.D. Cojocaru, E. Vasilescu, A. Cimpean. New
method of material selection applied to 3D structured hard tissue design –
Part II, Metalurgia
International, 15 (11) 2010, 18- 23, ISSN 1582-2214; [ISI-Web of Science/Science Citation Index Expanded - WOS:000280440800003; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris17. |
V.D. Cojocaru, A.
Nocivin, D. Raducanu, I. Cinca. Ni-Ti-Cu
alloy mechanical behaviour during cyclic testing, Metalurgia International, 15 (8) 2010, 24-27, ISSN 1582-2214;
[ISI-Web of Science/Science Citation
Index Expanded - WOS:000277598900005; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris18. |
A. Nocivin, D.
Raducanu, I. Cinca, V.D. Cojocaru, A. Cimpean, F. Grigore, R. Ion. New
method of material selection applied to 3D structured hard tissue design, Metalurgia International, 14 (sp.
Issue 11) 2009, 42-47, ISSN 1582-2214; [ISI-Web of Science/Science Citation Index Expanded - WOS:000270962400008; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris19. |
E. Vasilescu, P. Drob, D. Raducanu, I. Cinca, D.
Mareci, J.M.C. Moreno, M. Popa, C. Vasilescu, J.C.M. Rosca. Effect
of thermo-mechanical processing on the corrosion resistance of Ti6Al4V alloys
in biofluids, Corrosion Science, 51 (12) 2010,
2885-2896, ISSN 0010-938X, DOI:
10.1016/j.corsci.2009.08.014; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000272742600013; Scor relativ de influenta: 4,16071]. Recenzii/Indexari: SCOPUS; |
|
Ris20. |
D. Raducanu, V.D. Cojocaru, I. Cinca, E.
Vasilescu, P. Drob, I. Dan, M. Negreanu, C. Rusu Trisca, A. Nocivin. Surface finish
procedures applied on a new TiAlNb implant type, Metalurgia International, 14 (10) 2009, 29-32, ISSN 1582-2214; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000266190300005; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris21. |
D. Raducanu, A. Cimpean, V.D. Cojocaru, I.
Cinca, I. Demetrescu, S. Ivanescu, A. Buzaianu, M. Negreanu. Biocompatible
response to SBF coated TiAlNb alloy, Metalurgia
International, 14 (8) 2009, 44-47, ISSN 1582-2214; [ISI-Web of Science/Science Citation Index Expanded - WOS:000269587600010; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris22. |
E. Vasilescu, P. Drob, D. Raducanu, I. Dan, C. Vasilescu. Corrosion Resistance of Some Thermo-mechanically
Treated Titanium Bioalloys Depending on pH of Ringer Solution, Revista de Chimie, 60 (3) 2009,
241-247, ISSN 0034-7752; [ISI-Web of
Science/Science Citation Index Expanded - WOS:000265053000007; Scor relativ de influenta: 0,12579]. Recenzii/Indexari: SCOPUS; |
|
Ris23. |
D. Ionita, D. Raducanu, M. Prodana, I. Demetrescu. The manipulation of properties of Ti
bioalloys at micro and nanoscale using etching procedures, Conference: 21st International
Symposium on Ceramics in Medicine - BIOCERAMICS21,
Location: Buzios BRAZIL Date: OCT 21-24, 2008; Key Engineering
Materials, 396-398 (396-398) 2009, 393-396, ISSN 1013-9826; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000265306300093; Scor relativ de influenta: 1,40476]. Recenzii/Indexari: SCOPUS; |
|
Ris24. |
M.V. Popa, D. Raducanu,
E. Vasilescu, P. Drob, V.D. Cojocaru, C. Vasilescu, S. Ivanescu, J. C. Rosca.
Mechanical and corrosion behaviour of a Ti-Al-Nb alloy after deformation at elevated
temperatures, Materials and Corrosion, 59 (12) 2008, 919-928, ISSN 0947-5117, DOI:10.1002/maco.200805003; [ISI-Web of Science/Science
Citation Index Expanded - WOS:000262293400001; Scor relativ de influenta: 1,40476]. Recenzii/Indexari: SCOPUS; |
|
Ris25. |
D. Raducanu, I. Dan, I. Cinca, S. Ivanescu, V.D.
Cojocaru. Mechanical properties and microstructural features of a new solder
Ag-Au-Pd-Ti alloy, Metalurgia International, 13 (12) 2008,
22-25, ISSN 1582-2214; [ISI-Web of
Science/Science Citation Index Expanded - WOS:000258494000004; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris26. |
D. Raducanu, I. Dan, I. Cinca, S. Ivanescu, V.D.
Cojocaru, C. Rusu-Trisca, A. Nocivin. A new AuPdAgTi–type high noble class alloy –
synthesis and mechanical characteristics, Metalurgia International, 13 (10) 2008, 46-49, ISSN 1582-2214; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000258493600009; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris27. |
R. Vasilescu-Mirea, A.
Bara, A. Bondar, M. Iordoc, I. Iordache, M. Codescu, D. Raducanu, N.
Stancu, D. Patroi, E. Manta, V.D. Cojocaru, I. Cinca. Aliaje
de CoCrTi si TiAlNb acoperite cu carbon folosite pentru aplicatii biologice, Revista Romana de Materiale, 38 (2) 2008,
134-142, ISSN 1583-3186; [ISI-Web
of Science/Science Citation Index Expanded - WOS:000256898000008; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris28. |
D. Raducanu, V.D. Cojocaru, A. Buzaianu, I.
Cinca, I. Dan, M. Suciu. Structural characteristics of processed
Ti-6Al-7Nb alloy in (α+β) domain by plastic deformation and heat
treatment, Metalurgia International, 13 (5) 2008, 21-24, ISSN
1582-2214; [ISI-Web of
Science/Science Citation Index Expanded - WOS:000256691600004; Scor relativ de influenta: 0,00000]. Recenzii/Indexari: SCOPUS; |
|
Ris29. |
E. Vasilescu, D.
Raducanu, P. Drob, V.D. Cojocaru, C. Vasilescu. Influence of beta stabilizers on the corrosion resistance of a
biocompatible titanium alloy, Revista de Chimie, 58 (12) 2007,
1244-1248, ISSN 0034-7752; [ISI-Web
of Science/Science Citation Index Expanded - WOS:000256898000008;
Scor relativ de influenta: 0,12579]. Recenzii/Indexari:
SCOPUS; |
|
Ris30. |
D. Raducanu, V.D.
Cojocaru, I. Cinca, I. Ichim, A. Schin. Materials development on the
nanoscale by Accumulative Roll Bonding procedure, Journal of
Optoelectronics and Advanced Materials, 9 (11) 2007, 3346-3349, ISSN
1454-4164; [ISI-Web of
Science/Science Citation Index Expanded - WOS:000251435200011; Scor relativ de influenta: 0,33089]. Recenzii/Indexari: SCOPUS; |
|
Ris31. |
M.V. Popa, P. Drob, D. Raducanu, J.R. Castro, J.C.M.
Rosca.
Evaluation of microstructure
and corrosion behaviour of a titanium alloy in simulated biological fluids, Revista de Chimie, 58 (2) 2007,
179-182, ISSN 0034-7752; [ISI-Web of
Science/Science Citation Index Expanded - WOS:000245736800010; Scor relativ de influenta: 0,12579]. Recenzii/Indexari: SCOPUS; |
|
Ris32. |
D. Raducanu, E. Vasilescu, P. Drob, I. Cinca, C.
Vasilescu. Electrochemical
behaviour of an implant, thermal treated titanium base alloy, Revista de Chimie, 57 (12) 2006,
1221-1225, ISSN 0034-7752; [ISI-Web
of Science/Science Citation Index Expanded - WOS:000243897600008; Scor relativ de influenta: 0,12579]. Recenzii/Indexari: SCOPUS; |
|
Ris33. |
A.S. Lopez, J. Mirza-Rosca, E. Vasilescu, P. Drob,
D. Raducanu, L. Angelescu. Technical
and functional properties of some biocompatible thin films, Materials Chemistry and Physics, 86 (1) 2004, 38-43, ISSN 0254-0584; [ISI-Web of Science/Science
Citation Index Expanded - WOS:000221944300008; Scor relativ de influenta: 1,48387]. Recenzii/Indexari: SCOPUS; |
Risb - Reviste de
specialitate de circulaţie internaţională recunoscute (indexate
in alte Baze de Date Internationale - BDI specifice domeniului, care fac un
proces de selectie a revistelor pe baza unor criterii de performanta).
|
Risb1. |
V.D. Cojocaru, D.
Raducanu, I. Cinca, A. Căprărescu. Texture analysis for a SPD
processed Ti-10Zr-5Nb-5Ta alloy, acceptat la: UPB Scientific Bulletin, Series B:
Chemistry and Materials Science, ISSN
1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS; |
|
Risb2. |
V.D. Cojocaru, D.
Raducanu, I. Cinca, A. Căprărescu. Texture analysis by (110) pole
figure for a SPD processed Ti-25Ta-25Nb alloy, acceptat la: UPB
Scientific Bulletin, Series B: Chemistry and Materials Science, ISSN 1454-2331; Recenzii/Indexari: INSPEC, SCOPUS; |
|
Risb3. |
A. Vulcan, D. Raducanu,
V.D. Cojocaru, I. Cinca. Study of
texture patterns for a Ti-Ta-Nb alloy processed by Accumulative Roll-Bonding
(ARB), UPB Scientific Bulletin,
Series B: Chemistry and Materials Science, 74
(3) 2012, 107-114, ISSN 1454-2331; Recenzii/Indexari: INSPEC, SCOPUS (DOC ID: 84865102583); |
|
Risb4. |
A. Vulcan, D. Raducanu,
V.D. Cojocaru, I. Cinca, L. Angelescu. X-ray
diffraction of a Ti-Ta-Nb alloy processed by severe plastic, UPB Scientific Bulletin, Series B:
Chemistry and Materials Science, 74 (2)
2012, 269-276, ISSN 1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS (DOC ID: 84865142842); |
|
Risb5. |
A. Vulcan, D. Raducanu,
V.D. Cojocaru, I. Cinca. The evolution of mechanical characteristics
for a thermomechanical processed Ti-Ta-Zr alloy, UPB Scientific Bulletin, Series B:
Chemistry and Materials Science, 73 (3)
2011, 229-236, ISSN 1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS (DOC ID: 80051948363); |
|
Risb6. |
N. Serban, V.D.
Cojocaru, D. Raducanu, M. Butu, R. Saban, E. Ibraim. Microstructural observations
in a commercial AA 6063 aluminium alloy processed by ECAE (part I),
UPB Scientific Bulletin, Series B:
Chemistry and Materials Science, 73 (2)
2011, 237-250, ISSN 1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS (DOC ID: 80052012678); |
|
Risb7. |
C. Dumitrescu, D.
Raducanu, V.D. Cojocaru, I. Cinca. Investigations of mechanical properties for
a Ti-Ta-Nb alloy, UPB
Scientific Bulletin, Series B: Chemistry and Materials Science, 73 (2) 2011, 221-230, ISSN 1454-2331; Recenzii/Indexari: INSPEC, SCOPUS
(DOC ID: 79958132485); |
|
Risb8. |
V.D. Cojocaru, N.
Serban, D. Raducanu, I. Cinca, R. Saban. Microstructural observations of fracture
surfaces for a 6063-T1 ECAP processed aluminum alloy, UPB Scientific Bulletin, Series B:
Chemistry and Materials Science, 72 (4)
2010, 163-172, ISSN 1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS (DOC ID: 78649884626); |
|
Risb9. |
V.D. Cojocaru, D.
Raducanu, N. Serban, I. Cinca, R. Saban. Mechanical behaviour comparison between
un-processed and ECAP (Equal Channel Angular Pressing) processed 6063-T835
aluminum alloy, UPB
Scientific Bulletin, Series B: Chemistry and Materials Science, 72 (3) 2010, 193-203, ISSN 1454-2331; Recenzii/Indexari: INSPEC, SCOPUS
(DOC ID: 77955681883); |
|
Risb10. |
D. Raducanu, D.
Iordachescu, V.D. Cojocaru, V. Mitran, S. Ivanescu, I. Cinca. A
new AuPdAgTi–type high noble class alloy - obtaining and initial
characterization, UPB
Scientific Bulletin, Series B: Chemistry and Materials Science, 70 (3)
2008, 77-84, ISSN 1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS (DOC ID: 54249158067); |
|
Risb11. |
D. Raducanu, V.D.
Cojocaru, I. Ciuca. Aspects concerning
the specific features of the indentation-induced deformation in Ti-Ni alloys,
UPB Scientific Bulletin, Series B:
Chemistry and Materials Science, 61 (3-4) 1999, 127-133, ISSN
1454-2331; Recenzii/Indexari:
INSPEC, SCOPUS (DOC ID: 0033334761); |
Rns - Reviste de specialitate
de circulaţie naţională recunoscute de CNCSIS.
|
Rns1. |
D. Raducanu, A. Nocivin, A. Santana Lopez, J. Marza Rosca, D.
Monopoli Forleo, E.R. Grau-Bassas, D. Gonzales Martin, V.D. Cojocaru, I.
Cinca. Design and experimentation of a
titanium alloy new type implant with nanostructured surfaces, Metalurgia 62 (1) 2010,
13-17, ISSN 0461-9579 (cod CNCSIS:
481; categoria B+); |
|
Rns2. |
A. Buzaianu, E. Vasile, R.D. Trusca, R.M. Piticescu, D. Raducanu, V.D. Cojocaru, C. Moldovan. Analisis of Hybrid and Nanostructured
Biocompatible Materials by High Resolution SEM, Buletinul Institutului Politehnic Iasi, Sectia Stiinta si
Ingineria Materialelor, LIV (1) 2009, 138-146, ISSN 1453-1690 (cod CNCSIS: 86; categoria B); |
|
Rns3. |
A.
Nocivin, D. Raducanu, V.D. Cojocaru, I. Cinca. Stress relaxation in titanium alloys at high temperatures,
Analele Universitatii Ovidius, Seria: Inginerie Mecanica, IX (1) 2007, 23-27,
ISSN 1224-1776 (cod CNCSIS: 603, categoria B+); |
|
Rns4. |
D.
Raducanu, V. D. Cojocaru, C.R.
Trisca, A. Nocivin, I. Cinca. A
Ti-Al-Nb Alloy Investigated after Deformation at High Temperature, Acta
Universitatis Pontica Euxinus, VI (8) 2007, 65-71, ISSN 1312-1669; |
|
Rns5. |
D.
Raducanu, T. Savu, V.D. Cojocaru, I. Cinca. Aplicatie de instrumentatie
virtuala pentru deformarea plastica a materialelor, Metalurgia 59 (6)
2007, 10-13, ISSN 0461-9579 (cod
CNCSIS: 481; categoria B+); |
|
Rns6. |
A.
Buzaianu, D. Raducanu, R. Trusca, E. Vasile, V.D. Cojocaru, I Rusu. Versatil Titanium Alloy for Biomedical
Application to Spinal Implants, Buletinul
Institutului Politehnic Iasi, Sectia Stiinta si Ingineria Materialelor,
LIII-LVII (4) 2007, 31-39, ISSN
1453-1690 (cod CNCSIS: 86; categoria C); |
|
Rns7. |
E.
Vasile, A. Buzaianu, D. Raducanu, V.D. Cojocaru, I Rusu, E. Alexandrescu. General Investigations of complex Co-W
Alloys to Spinal Implants, Buletinul Institutului Politehnic Iasi, Sectia
Stiinta si Ingineria Materialelor, LIII-LVII (4) 2007, 321-327, ISSN 1453-1690 (cod CNCSIS: 86; categoria
C); |
|
Rns8. |
V. D. Cojocaru, D. Raducanu, I.
Cinca, A. Nocivin. Procesarea la rece a unor aliaje biocompatibile pe baza
de metale nobile, Metalurgia, 58 (10) 2006, 5-12, ISSN 0461-9579 (cod CNCSIS: 481; categoria B); |
|
Rns9. |
I.
Cinca, D. Raducanu, V.D. Cojocaru. Procesarea la cald a unor aliaje
biocompatibile pe baza de metale nobile, Metalurgia, 58 (9) 2006, 11-14,
ISSN 0461-9579 (cod CNCSIS: 481;
categoria B); |
|
Rns10. |
D.
Raducanu, D. Bunea, V.D. Cojocaru, I. Cinca. High-temperature plastic
deformation behaviour of commercially titanium used for dental implants,
Metalurgia International, 10 (4) 2005, 3-7, ISSN 1582-2214 (cod CNCSIS: 480; categoria C); |
|
Rns11. |
D.
Raducanu, M Tarcolea, V.D. Cojocaru, P. Marian, T. Iordanescu. Aspecte
referitoare la formarea structurilor mixte in oteluri microaliate cu continut
scazut de carbon (X70), Metalurgia, 57 (2) 2005, 22-30, ISSN 0461-9579 (cod CNCSIS: 481; categoria C); |
|
Rns12. |
D.
Raducanu, L. M. Angelescu, I. Cinca, V.D.
Cojocaru. Comportarea la deformare plastica a titanului comercial
utilizat pentru implanturi dentare. Partea a-II-a. Deformarea plastica la
rece, Metalurgia, 56 (11) 2004, 10-15, ISSN 0461-9579, cod CNCSIS: 481; |
|
Rns13. |
D.
Raducanu, L. M. Angelescu, I. Cinca, V.D.
Cojocaru. Comportarea la deformare plastica a titanului comercial
utilizat pentru implanturi dentare. Partea a-I-a. Deformarea plastica la cald,
Metalurgia, 56 (10) 2004, 12-17, ISSN 0461-9579, cod CNCSIS: 481; |
Vis- Volumele unor
manifestări ştiinţifice internaţionale recunoscute,
organizate in ţară şi străinătate, indexate ISI
Thomson Reuters.
|
Vis1. |
A. Vulcan, D. Raducanu, V.D.
Cojocaru, I. Cinca, C. Dumitrescu. X-ray investigations during severe plastic
deformation of a β-Ti-25Ta-25Nb alloy,
E-Health and Bioengineering Conference - EHB 2011, 1-4, 24-26
November 2011, Iasi, Romania; [ISI-Web of Science/Science Citation Index Expanded - WOS:000304806300051]; Recenzii/Indexari:
SCOPUS
(DOC ID: 84857804839);
IEEE (DOC ID: 6150359); |
|
Vis2. |
N. Serban, R.
Saban, N. Ghiban, V.D. Cojocaru, B. Ghiban, A. Ghiban. Equal channel angular extrusion die design for optimum experimental
tests made on an AlMgSi alloy, The 20th INTERNATIONAL DAAAM SYMPOSIUM,
"Intelligent Manufacturing & Automation: Theory, Practice &
Education", Vol. 20, Nr. 1, 1547-1548, ISSN 1726-6979, ISBN
978-3-901509-70-4, 25-28 November 2009, Vienna, Austria; [ISI-Web of Science/Science Citation Index
Expanded - WOS:000282335600774]; |
|
Vis3. |
M.V. Popa, E. Vasilescu, P.
Drob, D. Raducanu, I. Cinca, C. Vasilescu. Corrosion
behavior of some new implant biomaterials in biofluids,
World Congress on
Medical Physics and Biomedical Engineering, 7-12
September 2009, Munich, GERMANY; IFMBE Proceedings, 25 (10) 2009, 20-23, ISSN
1680-0737, ISBN 978-3-642-03899-0 [ISI-Web of Science/Science Citation Index
Expanded - WOS:000282043000007];
Recenzii/Indexari: SCOPUS; |
|
Vis4. |
E. Vasilescu, P. Drob, D.
Raducanu, L. Angelescu, C. Iliuc. Bio-compatible thin films on rare earth
based permanent magnets, Symposium on Advances in Surface Engineering
- Fundamentals and Applications held at the 2001 MRS Fall Meeting, 26-29
November 2001, Boston, MA, USA; Materials Research Society Symposium Proceedings,
697 (697) 2001, 201-206, ISSN 0272-9172, ISBN 1-55899-633-8
[ISI-Web of Science/Science
Citation Index Expanded - WOS:000178303600031];
Recenzii/Indexari: SCOPUS; |
Visb- Volumele unor
manifestări ştiinţifice internaţionale recunoscute,
organizate in ţară şi străinătate indexate in alte
Baze de Date Internationale - BDI specifice domeniului, care fac un proces de
selectie a publicatiilor pe baza unor criterii de performanta.
|
Visb1. |
V.D. Cojocaru, D. Raducanu,
N.D. Scarisoreanu, I. Cinca. Characterization
of Ti-O-N films deposited on Ti-Ta-Nb substrate by plasma laser deposition,
34th
International Semiconductor Conference - CAS 2011,
265-268, DOI:10.1109/SMICND.2011.6095787; IEEE
catalog number: CFP11CAS-PRT, ISBN 978-1-61284-171-7, ISSN 1545-827X, 17-19
October 2011, Sinaia, Romania; Recenzii/Indexari: SCOPUS (DOC ID:
84255177274); IEEE (DOC
ID: 6095787); |
|
Visb2. |
V.D. Cojocaru, D. Raducanu, T.
Gloriant, I. Cinca. Texture
analysis for a nanocrystalline Ti-Ta-Nb alloy,
34th
International Semiconductor Conference - CAS 2011,
295-298, DOI:10.1109/SMICND.2011.6095796; IEEE
catalog number: CFP11CAS-PRT, ISBN 978-1-61284-171-7, ISSN 1545-827X, 17-19
October 2011, Sinaia, Romania; Recenzii/Indexari: SCOPUS (DOC ID:
84255198105);
IEEE (DOC ID: 6095796); |
|
Visb3. |
A. Vulcan, V.D. Cojocaru, D. Raducanu, I.
Cinca, C. Dumitrescu. Mechanical
behaviour of a thermo-mechanical processed Ti-25Ta-5Zr biocompatible alloy,
3rd International Conference on Advanced Materials and Sysyems - ICAMS 2010, 227-232, ISSN 2068-0783,
16-18 September 2010, Bucharest, Romania; Recenzii/Indexari:
SCOPUS
(DOC ID: 79954551059); |
|
Visb4. |
C. Dumitrescu, V.D. Cojocaru, D.
Raducanu, I. Cinca, A. Vulcan. Mechanical
behaviour comparison between two β-type Ti alloys, 3rd
International Conference on Advanced Materials and Sysyems - ICAMS 2010, 187-192, ISSN 2068-0783,
16-18 September 2010, Bucharest, Romania; Recenzii/Indexari:
SCOPUS
(DOC ID: 79959853764); |
Vi - Volumele unor
manifestări ştiinţifice internaţionale recunoscute,
organizate in ţară şi străinătate;
|
Vi1. |
M.V. Popa, E. Vasilescu, P.
Drob, D. Raducanu, C. Vasilescu, V.D. Cojocaru, S. I. Drob. Corrosion resistance and structural and
mechanical properties of a titanium base alloy by thermo-mechanical
processing, 3rd Regional Symposium on Electrochemistry: South – East
Europe, Book of Abstracts, Paper no. CPA-P-08, pag. 91, 13-17 May 2012,
Bucharest, Romania; |
|
Vi2. |
E. Vasilescu, P. Drob, C.
Vasilescu, S. I. Drob, D. Raducanu, V.D. Cojocaru, I. Cinca. Characterisation of corrosion stability of
a new nanostructured alloy, 2nd International Advances in Applied Physics
& Materials Science Congress, Book of Abstracts APMAS 2012, Paper no.
179, pag. 129, 26-29 April 2012, Antalya, Turkey; |
|
Vi3. |
C. Dumitrescu, D. Raducanu, V.D. Cojocaru,
D.Gordin, T. Gloriant. Texture
analysis in a Ti-25Ta-25Nb alloy, International Conference on Innovative Technologies – IN-TECH 2011,
62-64, ISBN 978-80-904502-6-4, 01-03 September 2011, Bratislava, Slovakia; |
|
Vi4. |
V.D. Cojocaru, D. Raducanu, I. Cinca, I.
Dan, M. Butu, C. Rusu-Trisca. Ti-Ta-Nb
ultra-thin – ultra-strength strips processed by SPD,
International Conference on Innovative
Technologies – IN-TECH 2011, 89-92, ISBN 978-80-904502-6-4, 01-03 September
2011, Bratislava, Slovakia; |
|
Vi5. |
V.D. Cojocaru, D. Raducanu, I. Cinca, N.
Scarisoreanu. Mechanical
properties evaluation for a Ti-Ta-Zr biocompatible alloy,
International Conference on Innovative
Technologies – IN-TECH 2011, 85-88, ISBN 978-80-904502-6-4, 01-03 September
2011, Bratislava, Slovakia; |
|
Vi6. |
A. Vulcan, D. Raducanu, V.D. Cojocaru, D.
Gordin, I. Thibon. Behavior of
Ti-25Ta-25Nb alloy during the severe plastic deformation (SPD),
International Conference on Innovative
Technologies – IN-TECH 2011, 283 - 286, ISBN 978-80-904502-6-4, 01-03
September 2011, Bratislava, Slovakia; |
|
Vi7. |
E. Bertrand, D.M. Gordin, P. Castany, T.
Gloriant, D. Ioan, V.D. Cojocaru, D. Raducanu. Deformation mechanisms in the Ti-25Ta-24Nb
biomedical titanium alloy, The 12th World Conference on Titanium – TITANIUM 2011, 19-24 June
2011, Beijing, China; |
|
Vi8. |
E.
Bertrand, T. Gloriant, D.M. Gordina, E. Vasilescu, P. Drob, C. Vasilescu,
S.I. Drob, V.D. Cojocaru, D. Raducanu. Elaboration, caractérisation mécanique et
corrosion d’un nouvel alliage biomédical Ti25Ta25Nb, Conférence pluridisciplinaire sur les
matériaux “MATERIAUX 2010”, 18-22 Octobre 2010, Nantes,
France; |
|
Vi9. |
V.D. Cojocaru, D. Raducanu, I. Cinca, I.
Dan, A. Vulcan, V. Dogaru. Thermomechanical
processing of a Ti-Ta-Nb alloy, International Conference Biomaterials,
Tissue Engineering & Medical devices – BiomMedD’2010, 215, ISSN 2069-0193, 23-25 September 2010, Sinaia, Romania; |
|
Vi10. |
A. Vulcan, V.D. Cojocaru, D. Raducanu, I.
Cinca. Initial mechanical
characterization of a Ti-25Ta-5Zr biocompatible alloy, Advances in
Engineering and Management - ADEM 2010,
85-86, ISBN 978-606-510-899-8, 19-21 May 2010, Drobeta Turnu Severin,
Romania; |
|
Vi11. |
V. Dogaru, V.D. Cojocaru, D. Raducanu, I.
Cinca Strain rate influence upon
mechanical properties of an as-cast Ti-25Ta-5Zr biocompatible alloy,
Advances in Engineering and Management - ADEM
2010, 49-50, ISBN 978-606-510-899-8, 19-21 May 2010, Drobeta Turnu
Severin, Romania; |
|
Vi12. |
C. Dumitrescu, V.D. Cojocaru, D.
Raducanu, I. Cinca. Cold roll-milling
and mechanical properties of a Ti-25Ta-25Nb biocompatible alloy, Advances
in Engineering and Management - ADEM
2010, 51-52, ISBN 978-606-510-899-8, 19-21 May 2010, Drobeta Turnu
Severin, Romania; |
|
Vi13. |
M.V.
Popa, E. Vasilescu, P. Drob, C.
Vasilescu, D. Raducanu, V.D. Cojocaru. Corosion resistance of advanced processing
titanium bioalloys in physiological environment, 17th
International Corrosion Congress, 06-10 Octomber, Las Vegas, USA, 2008, Ed.
ICC, paper 2544; |
|
Vi14. |
D. Raducanu, A. Cimpean, V.D. Cojocaru, i. Cinca, M.
Codescu, A. Bara, D. patroi, M.
Popescu Negreanu. Biocompatible
thin films at nanoscale, International
Conference on Material Science and Engineering - BRAMAT 2007, 22-24 February 2007, Brasov,
Romania, Cd-ROM; ISSN 1223-9631; |
|
Vi15. |
D. Raducanu, V.D. Cojocaru, I.
Cinca. Nanostructured materials types
for medical devices, International Conference Biomaterials & Medical
Devices - BiomMedD’2006, 9-12 September 2006, Iasi, Romania, ISBN
978-973-718-566-2; |
|
Vi16. |
D. Raducanu, V.D. Cojocaru, I.
Cinca. The use of titanium alloys for
spinal implants, International Conference Biomaterials & Medical Devices
- BiomMedD’2006, 9-12 September 2006, Iasi, Romania, ISBN 978-973-718-566-2; |
Vn - Volumele unor
manifestări ştiinţifice naţionale.
|
Vn1. |
V.D. Cojocaru, D. Raducanu, I. Cinca, S.
Ivanescu, I. Dan, A. Nocivin. A
New Implant -Type for Spine Surgery, Conference Excellence Research - A way to
INNOVATION, Vol. I, 17-1/6, 27-29 Iulie 2008, Brasov, ISSN 1844 -7090; |
|
Vn2. |
I. Cinca, D. Raducanu, A. Campean, V.D. Cojocaru,
S. Ivanescu, A. Buzaianu, M. Negreanu. Features
of Osteoblaste Cell Response to Biocompatible Coated Titanium Alloys, Conference Excellence Research - A way to
INNOVATION, Vol. I, 40-1/6,
27-29 Iulie 2008, Brasov, ISSN 1844-7090; |
|
Vn3. |
D. Raducanu, V.D. Cojocaru, I.
Cinca. Nanostructured Materials
Obtained by SPD (Severe Plastic Deformation) Procedures, Conference
Excellence Research – A way to ERA, Vol. I, 40-1/6, 24-26 Octombrie 2007, Brasov, ISSN
1843-5904; |
|
Vn4. |
D. Raducanu, V.D. Cojocaru, I.
Cinca. Aliaje de titan folosite la
realizarea unor tipuri de implante, Conferinta: Cercetarea de Excelenta
- premiza favorabila pentru
dezvoltarea spatiului romanesc de cercetare, Vol. I,
17-1/6, 22-24 Octombrie 2006,
Brasov, ISBN 978-973-718-554-9; |
|
Vn5. |
D. Raducanu, T. Savu, V.D. Cojocaru, I. Cinca, I.
Negulescu. Aplicatie
de instrumentatie virtuala pentru procesul de deformare plastica prin tragere”, Conferinta Nationala de Instrumentatie Virtuala – CNIV-2006, Editia
a-III-a, 41-45, 29 Mai 2006, Bucuresti, Cd-ROM; |
|
Vn6. |
T. Savu, D. Raducanu, I.
Cinca, V.D. Cojocaru. Laborator telematic integrat de
instrumentatie virtuala pentru stiinta materialelor, Conferinta Nationala
de Instrumentatie Virtuala – CNIV-2005, Editia a-II-a, 130-134, 27 Iunie
2005, Bucuresti, Cd-ROM; |
V. BREVETE DE
INVENŢIE / INOVAŢII (B,A)
B - Brevete de
invenţie.
|
B1. |
D.
Raducanu, V.D. Cojocaru, I. Cinca. Procedeu de procesare termomecanica
pentru aliajul Ti25Ta25Nb, Cerere brevet
nr. A/01135/11.11.2011; |
|
B2. |
D.
Raducanu, V.D. Cojocaru, I. Cinca. Tratament termic si prelucrare plastica la cad pentru aliajul Ti-25.81Al-13.58Nb-1.93Ta-1.26Cr-0.60Ni, Cerere brevet nr. A/01393/13.12.2011; |
|
B3. |
D.
Raducanu, V.D. Cojocaru, I. Cinca, I. Dan, S. Ivanescu. Titanium containing noble metal alloy used for making dental
prostheses by metal-ceramic technology, contains gold, silver, palladium and
titanium, Nr. Brevet
RO125271-A2, Publicat 30 Mar 2010; Main IPC A61C-013/08; Indexare: Derwent Innovation Index/ISI Web of Knowledge |
|
B4. |
D.
Raducanu, V.D. Cojocaru, I. Cinca, I. Dan, S. Ivanescu. Process for thermo-mechanically processing Ti-6Al-7Nb alloy for
making spinal implants,
Nr. Brevet RO125313-A2, Publicat 30 Mar 2010; Main IPC C21D-008/00;
Indexare: Derwent Innovation
Index/ISI Web of Knowledge |
|
B5. |
D. Raducanu, L. Angelescu, V.D. Cojocaru, M.C.
Bunescu, M.C. Valeanu, M. Trupina, W. Kappel, S. Alexandru, I. Ivan. Vacuum non magnetic biocompatible layers
deposition on magnetic alloy consists of cathodic spraying in a container for
vapor phase deposition of titanium nitride, Nr. Brevet RO119897-B1, Publicat 30 Mai 2005; Main IPC
C23C-014/35; Indexare: Derwent
Innovation Index/ISI Web of Knowledge |
A - Inovaţii
şi alte creaţii.
VI. CONTRACTE ŞI
RAPOARTE ŞTIINŢIFICE (P,F)
P – Proiecte de
cercetare-dezvoltare-inovare obtinute prin competitie, pe bază de
contract/grant, in tara/strainatate (Pi – internationale, Pn - nationale).
Pi - Proiecte internationale de cerectare-dezvoltare-inovare obtinute prin competitie, pe baza de contract/grant la care am fost director de proiect / responsabil al partenerului.
|
Pi1. |
“Advanced nanostructured metallic biomaterials for implantable medical
devices”, CNMP PN II - MNT Era-NET, Contract: MNT-7-017/2009, 2009 -
2011; Director de proiect; |
|
Pi2. |
“TiAl alloys processed to improve operating capabilities in
automotive and aerospace applications”, CNMP PN II - MNT Era-NET, Contract:
MNT-7-019/2010, 2010 - 2011; Director
de proiect; |
|
Pi3. |
“Multifunctional nanostructured titanium implant surfaces and
biomechanical considerations of animal models used in tissue engineering of
bone”, CNMP PN II - MNT Era-NET, Contract: MNT-7-010/2008, 2008 - 2009; Director de proiect; |
Pn - Proiecte nationale de
cerectare-dezvoltare-inovare obtinute prin competitie la care am fost director
proiect/ responsabil al partenerului.
|
Pn1. |
“Interactiibio / non-bio implicate in design-ul tesuturilor tari - InTesTa”, CNMP PN-II, Nr. 41-059/14.09.2007,
UPB-CEMS, 2007 - 2009; Director de
proiect; |
|
Pn2. |
“Retea integrata de
cercetare pentru constituirea unei platforme tehnologice de biomateriale
avansate, compatibila EuMaT - ADVABIOMAT”, BIOTECH CEEX06 Nr. 54/20.07.2006, UPB-CEMS, 2006 - 2008; Director de proiect; |
|
Pn3. |
“Materiale nanostructurate
biocompatibile pentru dispozitive medicale - NANOBIOMED”, AMCSIT
CEEX05 Nr. 40/3.10.2005, UPB-CEMS,
2005 - 2008; Director de proiect; |
|
Pn4. |
“Noi
biomateriale avansate, nanostructurate cu baza titan si elemente de aliere
netoxice - NanoBioTiAll”,
CNMP PN-II, Nr. 71-021/14.09.2007,
UPB-CEMS, 2007 - 2010; Director de
proiect; |
|
Pn5. |
“Integrated laboratory with applications in
materials science, axed on micromechanical testing -
MICROMAT”, IMPACT Nr. 429/2007, UPB-CEMS, 2007; Director de proiect; |
|
Pn6. |
“Sistem integrat de
cercetari avansate pentru biomateriale alternative cu aplicatii in
stomatologie - BIODENTAL”, AMCSIT CEEX06
Nr. 154/20.07.2006, UPB-CEMS, 2006 - 2008; Director de proiect; |
|
Pn7. |
“Dispozitive medicale
implantabile pentru chirurgia coloanei - IMEDIS”, AMCSIT CEEX05 Nr. 17/3.10.2005, UPB-CEMS, 2005 - 2008; Director de proiect; |
|
Pn8. |
“Laborator integrat cu character telematic de instrumentatie virtuala
pentru stiinta materialelor”, INFOSOC
Nr. 160/01.10.2004, UPB-CEMS, 2004 - 2006; Director de proiect; |
Pnc - Proiecte nationale de
cerectare-dezvoltare-inovare obtinute prin competitie la care am fost membru in
colectivul de lucru.
|
Pnc1. |
“Produse prietenoase mediului pe baza de acoperiri compozite
polimerice conductoare pe suporturi nanostructurate cu efect antifouling si
aplicatii in reducerea poluarii si a coroziunii - ProdCompoCor”, CNMP PN-II, Nr. 32-106/01.10.2008, UPB-CEMS, 2008
- 2011; |
|
Pnc2. |
“Biomateriale metalice
avansate, nanostructurate, pentru implante ortopedice - BioTiTaNano”, CNMP PN-II, Nr. 72-188/01.10.2008, UPB-CEMS, 2008
- 2011; |
|
Pnc3. |
“Micro/nano
materiale functionale inteligente - PM-SMART”, CNMP PN-II, Nr. 71-116/14.09.2007, UPB-CEMS, 2007
- 2010; |
|
Pnc4. |
“Cercetari fundamentale si aplicative privind obtinerea produselor
tubulare din oteluri de caliate superioara in vederea reducerii costurilor si
ecologizarii productiei”, AMCSIT CEEX06
Nr. XC22/20.07.2006, UPB-CEMS, 2006 - 2008; |
|
Pnc5. |
“Structuri 2D si 3D din
aliaje ternare biocompatibile cu memoria formei - BIOSMETA”, AMCSIT
CEEX05 Nr. 25/3.10.2005, UPB-CEMS,
2005 - 2008; |
F - Rapoarte
stiintifice
VII. COMUNICĂRI
ŞTIINŢIFICE NEPUBLICATE (E)
E – Lucrări prezentate la
diferite seminarii/expoziţii, conferinţe, etc.
Data, Semnatura,
23.11.2012 Prof.dr.ing.
Doina RADUCANU